Unnn…
I think that you can choose 64 bit and 32 bit for JRE installation, did you choose 64 bit? (In this case, Windows 8.1 also needs to be running at 64 bit)
Excuse me. I made a mistake.
Since it seems that the server is restarted now, it can not be checked,
Since NIS itself seems to be running, please make sure that the Servant is running.
Sorry - Yes i just restarted the computer, the servent is running now. can you please check what is wrong?
As far as I can see, 7778, 7880, and 7890 are open so I think there is no problem.
ok will check again tomorrow and see the test result.
1 Like
@SaigonKing: The boot key for NIS is wrong. Please use the same as the one you use for the servant.
1 Like
thanx for some reason both the servant config and nis config got overwritten.
hopefully it will past the next test
1 Like
I am setting up a new supernode and it has failed 4 times in a row now. Can you tell me what the problem is? The ip/name is 185.122.57.148/Cyclops_WI
The supplied punlic key while enrolling the supernode was
42fca7a3a45ba3c1df1b6e108f440f8699862038882ebba9b982ab11d8e8e52a
while the public key i see for your node is
bd7a8bf0fc8fffc1c8ac6a1952de4d91f3d08c24bbc692b91d582597e78b54b9
So please check the delegated key i the NIS / Servant config.
I sent private delegate key instead of public key at step 10. I resent again but it doesn’t seem to work. Can you please change the key to bd7a8bf0fc8fffc1c8ac6a1952de4d91f3d08c24bbc692b91d582597e78b54b9 ? Thank you
The test is still failing. Can you please check if there is any other issue?
It will pass the next round.
Hi BR )
i want change my supernodes IP addresses
so do i need to send some xem messages, or i can write node name and new IP here, and you change it?
Or i need to do both? 
Thanks)
You can change the ip of a supernode registration by sending a message like
change ip < old ip > to < new ip >
for example
change ip 45.62.9.123 to 65.27.187.10
to the noderewards account.
and it will be changed automatically?
so then it changed,will it fail first few tests like every new node? or not?
and node number be changed also?
Should change the ip automatically.
It shouldn’t fail any round if it was passing before.
Node number does not change.
thank you
I sent the message:
change ip 195.54.162.144 to 195.54.162.238
but here http://chain.nem.ninja/#/nodes/
still old ip is shown.
How many time is needed to change it?
The bot doing the automatic changes needs a fix, please wait.